Typically working in remote areas with limited cellular coverage, the Topographic crew use Trimble CenterPoint RTX with a Trimble R10 GNSS Receiver.
Texas is oil country.
But before the rigs start pumping and the black gold flowing, pipes need to be laid and drilling locations must be staked. And that is where Topographic Land Surveyors, Inc. comes in. As a full-service specialist in land surveying, GIS/mapping and civil engineering, Texas-based Topographic Land Surveyors serves both the traditional and emerging energy sectors.
“Our bread and butter is the oil and gas industry,” says Josh Waldrip, Manager of As-Built Services at Topographic. “From Texas to New Mexico, Colorado, Oklahoma, Wyoming and North Dakota, we provide our clients with the location and positioning for installing underground pipelines and for staking drill sites.”
The Right Solution for Rural, Remote and Rough Terrain
Before GNSS surveying came along, Topographic’s crews needed to start every job from a known or assumed control point. “This meant doing things the ‘old school’ way—carrying a total station or even using tape measures and chains,” says Waldrip.
Today, 95 percent of Topographic’s work is done using GNSS. The company has 15 crews equipped with Trimble® R10 GNSS Receivers and Trimble CenterPoint® RTX correction service. Topographic regularly uses CenterPoint RTX for major projects such as staking wells and pipeline routes, along with smaller as-built projects. The company is currently using CenterPoint RTX to survey a 185-mile pipeline that runs from Oklahoma to Texas.
With Trimble CenterPoint RTX, users achieve horizontal accuracy of 2cm in real time.
Trimble CenterPoint RTX correction service uses GNSS data from a global network of GNSS reference stations. The data is streamed to Trimble control centers where it is processed by advanced modeling algorithms to generate correction data for real-time precise GNSS positioning. The corrections are broadcast to roving GNSS receivers via communications satellites or over the Internet via cellular phone services. The rover uses the information to produce high-accuracy GNSS positions. Users can achieve horizontal accuracy of 2cm in real time, equivalent to RTK but without the need for reference stations and radio datalinks.
This use of satellites to deliver the GNSS corrections makes the system particularly well-suited for Topographic’s work in remote locations. “Getting to job sites is often a challenge for us,” explains Waldrip, “They tend to be in hilly, rocky and generally rough areas. The beauty of RTX is that it provides real-time location anywhere, meaning our crews don’t have to traverse through forests or other rough and sometimes dangerous terrain just to set up RTK base stations or operate total stations.”
Topographic Surveyors use the Trimble Business Center software to deliver the accurate footage of pipe, acreage of land and location of features that their customers demand.
In addition to dealing with rugged landscapes, crews regularly need to route pipelines around private property, archeological sites, protected habitats, utilities and waterways. Waldrip says that CenterPoint RTX removes the headache of setting up, maintaining and moving base stations.
“Because we don’t have to set up a base station, use a radio or worry about cell service with RTX, we can hit the ground running,” he explains. “All we need to do is get in the truck, go to the job site, calibrate and start collecting data—it’s that simple, which is exactly why our crews love it.”
Waldrip notes that satellite delivery comes with a cost-saving benefit. “RTX replaces both the radio and the GNSS base station, meaning we save the cost of regularly buying—and repairing—these units,” he adds.
Trimble CenterPoint RTX removes the headache of setting up, maintaining and moving base stations.
Providing the Needed Accuracy
After using CenterPoint RTX on a number of smaller projects, Topographic is putting the service to work on a pipeline surveying project that will run from Cushing, Oklahoma south to Trenton, Texas. The 185-mile pipeline is part of a planned 840-mile line that will eventually extend to the Gulf of Mexico.
Because cellular and network coverage in this remote area is spotty, VRS and RTK won’t be options. Instead, Topographic’s crews are again using CenterPoint RTX with a Trimble R10. “Like most of our projects, this job requires that we survey everything with centimeter-level accuracy,” says Waldrip. “We can only do this using Trimble RTX correction service.”
Because CenterPoint RTX performance is equivalent to VRS or RTK, the level of precision will provide Topographic’s client with the accurate footage of pipe, acreage of land and location of features above or below ground.
To achieve this accuracy, and per the client’s specific request, Topographic crews use static GNSS techniques to set control points. The static data is processed in OPUS and then calibrated to the specified coordinate system. The points then serve as the basis for the control and calibration of the RTX real-time work.
“Using RTX allows us to work faster and more accurately, both of which give us an important competitive edge,” says Waldrip.
Nick Klenske writes about science, technology and innovation. Based in Chicago, he can be reached at nickklenske@gmail.com.