A 85Kb PDF of this article as it appeared in the magazine—complete with images—is available by clicking HERE
Two years of concentrated effort by their respective committees culminated in the adoption of the new 2016 Minimum Standard Detail Requirements for ALTA/NSPS Land Title Surveys by the American Land Title Association on October 8th and the National Society of Professional Surveyors on October 9th. The new standards will become effective on February 23rd of 2016.
The official adopted 2016 Standards can be found at www.nsps.us.com (along the right hand side of the page is a link to the Standards). Also included is a "red-lined" version of the 2011 Standards showing the deletions and additions that resulted in the 2016 version. The Standards can also be found at www.alta.org/forms (click on "Related Documents Effective 02-23016 – Preview").
Following is a brief overview of what most surveyors will likely see as the most significant changes.
Surveyors will note that the title of the standards has changed to "ALTA/NSPS" from "ALTA/ACSM" in order to acknowledge the merger of ACSM and NSPS. The committees also made wording consistent throughout the standards (with one exception) when referring to the surveyor’s obligation to locate certain objects and features ("observed in the process of conducting the fieldwork").
Section 2–Request for Survey
The list of unusual properties or interests in real property that can be the subject of an ALTA/NSPS Land Title Survey has been expanded so that it clearly includes easements.
Section 4–Records Research
In recognition of the purpose of an ALTA/ NSPS Land Title Survey, the surveyor must be provided with the most recent title commitment. However, if a title commitment is not made available, title evidence satisfactory to the title insurer, which might include an abstract of title, a title opinion, an old title policy or one of the various other types of products that title companies produce is acceptable.
Some of the documents referred to in the 2011 (and earlier) Standards as "Record Documents" were not actually documents recorded in the office of public record, thus the 2016 Standards have abandoned the term "Record Documents" throughout, in favor of merely referencing those documents that are "to be provided to the surveyor."
In several sections of the standards, what had previously been lists in paragraph form have been restructured into annotated lists for ease of reading. One example of this is in Section 4. This list of documents to be provided to the surveyor now includes "records established under state statutes for the purpose of imparting constructive notice of matters relating to real property (public records)" (e.g., deeds, copies of easements), and any unrecorded documents that affect the property and to which the client wishes the surveyor make reference.
The most important change to Section 4 is the last paragraph. All previous versions of the Standards–dating back to 1962, avoided outlining exactly who was responsible for obtaining other necessary documents. That stance likely had its origins in trying to adapt widely varying state standards and standards of practice to a national standard, but regardless of the reason, it was past time for the Standards to address the issue.
The 2016 Standards direct the surveyor to look to his or her jurisdictional standards (whether statutory (as they are in a few states), or administrative/regulatory (as they are in most states)) when either (a) the documents that were to be provided by virtue of Section 4 are not forthcoming, or (b) the surveyor needs other documents to complete the survey.
For those states that have no jurisdictional standards, like California and a few others, surveyors need to be familiar with the normal standard of care as referred to in Section 3.D. Given the variations across the country (and the fact that surveyors must comply with the laws and the normal standard of care in their areas), the committees felt this was the most logical and viable approach to this issue.
The introductory sentences to Section 5 address precision when locating the various features in the field. This issue had also been ignored since 1962 and, again, it was past time to address it. The degree of precision pursuant to the 2016 Standards is to be based on the surveyor’s professional judgment when taking into account "(a) the planned use of the property, if reported in writing to the surveyor by the client, lender, or insurer, or (b) the existing use, if the planned use is not so reported…"
A number of fairly minor but important modifications were made to Section 5; however, one major change is in subsection 5.E.iv. Essentially, what used to be Table A Item 11(a) has now been made a required part of an ALTA/NSPS Land Title Survey.
This will eliminate the conundrum caused by the dynamic between former Table A item 11(a) (evidence of utilities) and Sections 5.E.i. and ii. (observed evidence of easements) in the 2011 Standards. If Table A item 11a (or 11b) was not checked, the surveyor did not need to locate any observed evidence of utilities. However, if that utility evidence fell within an easement for which documentation was provided, or if that utility evidence represented the possibility of a prescriptive easement, the evidence did need to be located. Thus, there was confusion over whether or not utility evidence needed to be located; and if the wrong decision was made in that regard, there could be a very serious problem for the surveyor. (Readers who have attended one of this writer’s ALTA/ACSM programs have heard mention of a million dollar lawsuit against a surveyor revolving around this very issue.)
Section 6–Plat or Map
Section 6 now addresses the issue of dimensioning–leaving it to the judgment of the surveyor based on the planned use of the property as reported (or not).
When the surveyor decides it is appropriate to prepare a new description based on the results of his or her survey, Section 6.B.ii. now requires a note explaining how the new description relates to the record description (i.e., if it describes the same property and, if not, how it differs).
Subsection 5.E.ii. requires a summary of the plottable easements and servitudes listed in Schedule B2 of the title commitment, and a statement as to whether or not each item is shown. This will help eliminate unnecessary calls to surveyors from reviewers of the survey who have trouble interpreting or finding certain items.
If a Table A item has been negotiated or qualified in a manner that differs from how it was spelled out in the Standards, Section 6.D.g. requires an explanation. It also requires that any additional Table A items negotiated with the client all be identified as item 21; if there are multiple additional items, they shall be identified as 21(a), 21(b), etc.
Table A Item 6 now requires that a report or letter containing the zoning information that the client or lender wants identified on the plat/map be provided to the surveyor by the client. This addresses the problem identified after adoption of the 2011 Standards whereby title companies were to provide this information, but–due primarily to liability issues–they often declined to do so. Significantly, Item 6(b) also relieves the surveyor from having to graphically depict setback lines if doing so requires an interpretation on the part of the surveyor.
Item 8 now includes "substantial areas of refuse" which was necessary in exchange for the elimination of former Table A Item 18 ("Observed evidence of site use as a solid waste dump, sump or sanitary landfill").
Item 11 (utilities) has been a difficult item for surveyors since day one and it continues to become even more problematic over time. Main concerns revolve around client expectations, difficulty in getting one-call locate responses, difficulty in obtaining plans, and: Who is supposed to order all of that in the first place? Keeping in mind that what was 11(a) in 2011 has, in 2016, been included in 5.E.iv., Item 11 now only involves what had been 11(b)–what might be referred to as a "utility investigation."
The responsibility for trying to obtain utility plans and for ordering utility locates now clearly lies with the surveyor. However, there is nothing whatsoever to prevent surveyors from qualifying or spelling out what they will and will not do in that regard in their contract (yet another reason to use a written contract). Also, the wording in the "Note" following Item 11 has been modified and expanded to lower the client’s expectations even further with regard to what surveyors may actually be able to accomplish with regard to utilities. A similar note could–and probably should– be part of the surveyor’s contract and should also appear on the face of the plat or map with information related the actual results of the specific investigation.
One of the biggest problems that came out of the 2011 Standards was the pervasive lack of understanding of Item 18 (Wetlands) on the part of clients, lenders and, to some extent, surveyors. This can only be attributed to poor drafting of the item in 2011. For 2016, this item says exactly what it should say (and what was intended in 2011) and the new wording should make it clear that surveyors are not responsible for delineating wetlands.
Former Table A Item 18 (evidence of site use as a solid waste dump, sump or sanitary landfill) has been eliminated. Such matters are properly the subject of a Phase One Environmental Assessment, not a survey.
What had been Item 19(b) in the 2011 Standards has also been eliminated because it was determined that setting monuments on someone else’s property could be problematic and could constitute a trespass.
Item 20 now states that information related to professional liability insurance shall not appear on the face of the plat or map. This is in response to those attorneys who have sometimes made the outrageous demand that surveyors identify the extent of their professional liability coverage on the face of the plat/map.
Every modification reflected in the 2016 Standards has its own specific purpose. There are many more changes besides those outlined above. Virtually every single change will either directly or indirectly benefit surveyors, while importantly, not diminishing the value of the product for the ultimate user–the title insurers.
As has been the case ever since this writer became involved with the standards in 1988, the NSPS and ALTA committees work very closely together to maintain a Standard that will result in surveys that meet the needs of the title industry while also keeping the requirements clear, realistic and achievable for surveyors.
NSPS was represented at the August joint meeting of the NSPS and ALTA committees by professional surveyors Curt Sumner (NSPS Executive Director), Judy Beale (VA), Paul Burn (NV), Todd Raksadt (AZ) and Malcolm Shaw (NY). Kelly Romeo, Vice President of ALTA provided very able assistance throughout the process. A debt of gratitude is owed to all of them and, as well, to the members of the ALTA Committee. I would like to single out Malcom Shaw for special recognition since he passed away unexpectedly in October shortly after the new standards were approved.
Gary Kent is Director, Integrated Services at The Schneider Corporation in Indianapolis. He is past-president of ACSM and chairs the ALTA/ACSM Committee for NSPS and the Liaison Committee for ALTA. He is on the Indiana Board of Registration and lectures both locally and nationally.
A 85Kb PDF of this article as it appeared in the magazine—complete with images—is available by clicking HERE